HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual page 36

From the Default screen, enter the Menu Mode by pressing the Enter
Main menu appears with the u next to Load/Unload.
u
Load/Unload
Remove Magazine
Maintenance Menu
Configure Menu
Press Enter Enter to display the first Load/Unload submenu, as shown.
Enter Enter
From:
u
*Slot 1
To
*Drv0
The u is next to line 2 of the display. Line 2 shows the top item in a scrollable list of sources.
Note that a ¤ has appeared on the right of the bottom line. This indicates that the q button can
now be used to scroll through the list, and that the top item on the list is displayed. As soon as
you press the q button, the following three things happen:
1. The list scrolls down one item (only line 2 scrolls).
2. An £ displays on the right of line 1, meaning there are more options above the item
displayed on line 2.
3. The * at the left of line 2 (the current selection) disappears, meaning you have not selected
an item from the list.
NOTE: The contents of the lists on line 2 and line 4 vary as follows.
Initial Screen – From Line
The list on line 2 (the From line) includes every drive and magazine slot (including mail slots)
with cartridges. (You cannot retrieve a cartridge from an empty slot or drive.)
Initial Screen – To Line
The list on line 4 (the To line) includes all the valid destination choices, that is, drives and slots
that are empty. (You can't put a cartridge into a full slot or drive.)
Scroll List – To Line
There is another limitation on the To list. If you select a drive on the From screen, the To list
can include only slots. If you select a slot on the From screen, the To list can contain only
drives.
For example, load the cartridge that is in Slot 11 into any available drive. Use the q button to
scroll line two to Slot 11. The following screen appears:
From:
u
Slot 11
To:
Drv 0
¤
¤
£
Operation 2-15
Enter button. The following Enter Enter