Figure C-20. Attaching The Belt Clamp Bracket; Figure C-21. Replacing The Bottom Pulley End Cap - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

4. Attach the belt clamp bracket to the belt on the side closest to the PTM motor housing
assembly. Make sure one tooth of the belt fits tight in the space in the bracket (
C-20).

Figure C-20. Attaching the belt clamp bracket

5. Replace the bottom pulley end cap, securing it with self-tapping screws on both sides (
Figure C-21).

Figure C-21. Replacing the bottom pulley end cap

cc0039
1
cc0040
Installation C-21
Figure


1