Remove The Access Panel; Install The Access Panel; Drive Blank - HPE D2220sb Maintenance And Service Manual

Storage blade
Table of Contents

Advertisement

When the service procedures are complete, install the module by reversing the removal procedure.

Remove the access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
CAUTION: Do not operate the D2220sb with the access panel open or removed. Operating
the D2220sb in this manner results in improper airflow and improper cooling that can lead to
thermal damage.
To remove the component:
Power down the partner server blade (on page 20).
1.
Remove the D2220sb (on page 20).
2.
Press the access panel release button.
3.
Slide the access panel toward the rear of the D2220sb.
4.
Remove the access panel.
5.

Install the access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
CAUTION: Do not operate the D2220sb with the access panel open or removed. Operating
the D2220sb in this manner results in improper airflow and improper cooling that can lead to
thermal damage.
To install the component:
Place the access panel on top of the D2220sb. Allow the panel to extend past the rear of the
1.
D2220sb approximately 0.8 cm (0.2 in).
Slide the access panel toward the front of the D2220sb. The access panel locks into position.
2.

Drive blank

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the D2220sb
before beginning any installation procedure. Improper grounding can cause ESD.
Removal and replacement procedures 25

Advertisement

Table of Contents
loading

Table of Contents