Apply; Set - HPE XP7 User Manual

apply

Description
The apply subcommand saves monitoring data specified by the group subcommand into files.
The login subcommand must run before the apply subcommand runs.
The apply subcommand does nothing if the group subcommand runs.
The settings made by the group subcommand will be reset when the apply subcommand
finishes.
Syntax
apply

set

Description
The set subcommand starts or ends monitoring the storage system (for example, starting or
ending the collection of performance statistics). The set subcommand also specifies the sampling
interval (interval of collecting statistics) in short range monitoring.
If you want to use the set subcommand, you must use the login subcommand (see
(page 63) to log on to SVP). Ensure that the set subcommand runs immediately before Export
Tool finishes.
Executing the set subcommand generates an error in the following conditions:
Some other user is being logged onto SVP in Modify mode.
Maintenance operations are being performed at SVP.
If an error occurs, do the following:
Ensure that all users who are logged onto SVP are not in Modify mode. If any user is logged
on in Modify mode, ask the user to switch to View mode.
Wait until maintenance operations finish at SVP, so that the set subcommand can run.
NOTE:
◦
Batch files can include script that will run when an error occurs. For information about
writing such a script in your batch file, see Notes in
◦
When the set subcommand starts or ends the monitoring or changes the sampling
interval after the Monitor Performance window is started, the contents displayed in the
Monitor Performance window do not change automatically in conjunction with the set
subcommand operation. To display the current monitoring status in the Monitor
Performance window, click Refresh on the menu bar of the Remote Web Console main
window.
◦
If you change the specified sampling interval during a monitoring, the previously collected
monitoring data will be deleted.
Syntax
set [switch={m|off}]
80 Exporting Performance Monitor data
Following are notes of the set command.
"Running Export Tool" (page
"login"
56).