Current Setting - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Query parameters:
<stepsize>
Example:

7.5.4 Current Setting

The SOURce:CURRent subsystem contains the commands for setting the current limit
of the output channels. The default unit is A.
User Manual 1178.8736.02 ─ 05
DEFault
Default value of stepsize.
Range: 0.001 to 5.000
Increment: 0.001
*RST: 0.100
Default unit: V
DEFault
Queries the default voltage step size.
INST OUT1
VOLT:STEP 0.001
VOLT:STEP DEF
VOLT:STEP? DEF -> 0.10
Returns the default stepsize voltage.
See also Example "Configuring the output voltage"
Remote Control Commands
Configuration Commands
on page 103.
105