R&S NGL200 Series User Manual page 138

®
R&S NGL200/NGM200
Example:
Usage:
ARBitrary:REPetitions <repetition_rate>
ARBitrary:REPetitions?
Sets or queries the repetition rate of the defined arbitrary waveform for the previous
selected channel. Up to 65535 repetitions are possible. If the repetition rate „0" is
selected the arbitrary waveform of the previous selected channel is repeated infinitely.
Parameters:
repetition_rate
Example:
ARBitrary:SAVE
Saves the current arbitrary table to a file (filename specified with ARB:FNAM).
Example:
Usage:
ARBitrary:TRANsfer <channel>
Transfers the defined arbitrary table to the selected channel.
Parameters:
<channel>
Example:
Usage:
User Manual 1178.8736.02 ─ 05
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV",INT
ARB:SAVE
ARB:LOAD
Loads an arbitrary data from filename ARB03.CSV.
Event
Range: 0 to 65535
The "0" indicates infinite repetition.
INST OUT1
ARB:REP 10
ARB:REP? -> 10
The returned repetition rate of the Ch1 arbitrary waveform is 10.
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV",INT
ARB:SAVE
Saves a predefined arbitrary data to a filename ARB03.CSV in
the internal memory location.
Event
1 | 2 | 3 | 4
See Example "Configuring an arbitrary sequence"
Setting only
Remote Control Commands
Advanced Operating Commands
on page 132.
135