Usb Connection - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
2. Select "Enable" menu item to set "On" to enable wireless LAN.
The R&S NGL/NGM began searching available WiFi network and the "Status"
shows "Searching".
3. Select the "Select Network" to connect the required WiFi network.
If connection is successful, the "Status" shows "Connected". See
When the connection is alive, the WLAN icon turns white on the device status bar.
See
Figure 6-38: WLAN connected
4. To disconnect, select the Disconnect in the "Wireless LAN settings" dialog.

6.15.2 USB Connection

Alternatively, connect a USB cable to the USB port (see
connection. The R&S NGL/NGM supports USB CDC and USB TMC connection.
1. Select "USB Class" from the "Network Connections" dialog.
The R&S NGL/NGM displays the USB class dialog to select the USB connection.
Figure 6-39: USB dialog
2. Set the USB class.
3. Select "Set" to confirm the selection.
User Manual 1178.8736.02 ─ 05
"Device status bar" on page 27.
Instrument Functions
Interfaces
Figure 6-38.
Figure 4-2) and PC for a USB
81