Using The Touchscreen; Using Gestures; Accessing Functionality In The Home Window - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Figure 5-3: Color coding of operating conditions
Color

5.2 Using the Touchscreen

The R&S NGL/NGM provides a touch-sensitive screen. Touch can be disabled (see
Chapter 6.8, "User
trates the touchscreen gestures and highlight the different touchscreen features that
can be performed on the instrument.

5.2.1 Using Gestures

Tap
Tap on the screen to select or toggle the value.
Swipe up and down
Swipe up to scroll down, swipe down to scroll up in the menu.

5.2.2 Accessing Functionality in the Home Window

The following illustrates various ways of accessing functions in the home window.
User Manual 1178.8736.02 ─ 05
Operating mode Description
DVM mode Display DVM measurement.
Editing mode A solid blue cursor is shown when an item is selected.
CV mode Active outputs are operated in a constant voltage mode.
CC mode Active outputs are operated in a constant current mode.
CR mode Active outputs are operated in a constant resistance mode.
This condition occurs if the set voltage is below the voltage
applied externally at the output connectors (sink mode) and
constant resistor is switched on in channel menu.
Key", on page 67) in the instrument settings. The following illus-
Operating Basics
Using the Touchscreen
30