Safety Limit Setting - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
INSTrument:NSELect <channel>
INSTrument:NSELect?
Selects or queries the channel by number.
Setting parameters:
<channel>
Example:
INSTrument[:SELect] <channel>
INSTrument[:SELect]?
Selects or queries the channel by keyword.
Setting parameters:
<channel>
Example:

7.5.2 Safety Limit Setting

The SOURce:ALIM subsystem contains the commands for setting the safety limits of
the output channels.
User Manual 1178.8736.02 ─ 05
1 | 2 | 3 | 4
Range: 1 to 2
See Example "Selecting a channel"
OUT1 | OUTP1 | OUTPut1 | 1 | OUT2 | OUTP2 | OUTPut2 | 2
OUT1 | OUTP1 | OUTPut1 | 1
Selects Channel 1 (Ch1)
OUT2 | OUTP2 | OUTPut2 | 2
Selects Channel 2 (Ch2)
Range: 1 to 2
See Example "Selecting a channel"
Remote Control Commands
Configuration Commands
on page 98.
on page 98.
99