R&S NGL200 Series User Manual page 157

®
R&S NGL200/NGM200
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:NTRansition
STATus:QUEStionable:INSTrument:PTRansition
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:PTRansition
STATus:QUEStionable:INSTrument:CONDition?
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:CONDition? <Condition>
Returns the contents of the CONDition part of the status register to check for question-
able instrument or measurement states. Reading the CONDition registers does not
delete the contents.
Suffix:
<Channel>
Return values:
<Condition>
Usage:
STATus:QUEStionable:INSTrument:ENABle <arg0>
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:ENABle <Enable_Value>
Sets or queries the enable mask that allows true conditions in the EVENt part to be
reported in the summary bit.
If a bit in the ENABle part is 1, and the corresponding EVENt bit is true, a positive tran-
sition occurs in the summary bit. This transition is reported to the next higher level.
Suffix:
<Channel>
Parameters:
<Enable_Value>
Example:
STATus:QUEStionable:INSTrument[:EVENt]?
STATus:QUEStionable:INSTrument:ISUMmary<Channel>[:EVENt]?
Returns the contents of the EVENt part of the status register to check whether an
event has occurred since the last reading. Reading an EVENt register deletes its con-
tents.
Suffix:
<Channel>
User Manual 1178.8736.02 ─ 05
............................................................... 155
.
1..n
Condition bits in decimal representation
Range: 0 to 65535
Query only
.
1..n
Bit mask in decimal representation
Range: 0 to 65535
STATus:QUEStionable:INSTrument:ISUMmary1:
ENABle?
Queries the event register for the Standard QUEStionable Reg-
ister group.
.
1..n
Remote Control Commands
Status Reporting Commands
...............................155
............................... 155
154