Output - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
3. Activate the "Fast Transient Response" from the menu.
The R&S NGL/NGM applies the fast transient response on the operating condition
and displays the "Fast Transient Response" icon on the selected channel status
bar information.
The setting of "Fast Transient Response" affects the output impedance control loop
behavior. See

6.2.3 Output

The "Output" menu provides the settings for output impedance, output delay and trig-
gers action on the output mode.
For more information on output delay, see
For more information on output impedance, see
Navigation to the output menu
1. Press [Settings] key.
The R&S NGL/NGM displays the device/channel menu window.
2. Select the required channel tab to apply output delay.
The R&S NGL/NGM displays the selected channel menu.
3. Select the "Output" menu item.
The R&S NGL/NGM displays the "Output" dialog.
Figure 6-6: Output delay dialog
Impedance
The output impedance function is disabled during voltage ramp time of "Ramp" func-
tion. See
User Manual 1178.8736.02 ─ 05
"Impedance" on page 44.
Chapter 6.7.2, "Ramp",
Activating the Channels Output
"Output delay"
Table 6-2.
on page 66.
Instrument Functions
on page 47.
44