R&S NGL200 Series User Manual page 110

®
R&S NGL200/NGM200
// by the set 1 Ampere
CURR:STEP?
// queries the current step size
// response: 1.000
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement] <stepsize>
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]? [<stepsize>]
Sets or queries the incremental step size for the
Setting parameters:
<stepsize>
Query parameters:
<stepsize>
Example:
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] <current>
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [<current>]
Sets or queries the current value of the selected channel.
Setting parameters:
<current>
User Manual 1178.8736.02 ─ 05
numeric | DEFault
numeric
Step value in A.
DEFault
Default value of stepsize.
Range: 0.0001 to 2.000
Increment: 0.0001
*RST: 0.010
Default unit: A
DEFault
Queries the default voltage step size.
INST OUT1
CURR:STEP 0.005
CURR:STEP DEF
VOLT:STEP? DEF -> 0.1000E+00
Returns the default stepsize for current.
See Example "Configuring the current output"
numeric | MIN | MAX | UP | DOWN
numeric
Numeric value in the range of 0.000 to 6.010.
MIN
Minimum current at 0.010 A.
Remote Control Commands
Configuration Commands
............................................. 107
....................................................... 107
CURR UP | CURR DOWN
on page 106.
command.
107