®
R&S
NGL200/NGM200
Example:
MEASure[:SCALar]:POWer?
Queries the currently supplied power of the selected channel.
Example:
Usage:
MEASure[:SCALar]:STATistic:COUNt?
Queries the number of measurements.
Usage:
MEASure[:SCALar]:STATistic:RESet
Resets the minimum, maximum and average statistics values for voltage, current, and
power.
Additionally this command resets the measured energy.
MEASure[:SCALar]:CURRent[:DC]?
Queries the currently measured current of the selected channel.
Example:
Usage:
MEASure[:SCALar][:CURRent][:DC]:AVG?
Queries the average measured output current.
Usage:
MEASure[:SCALar][:CURRent][:DC]:MAX?
Queries the maximum measured output current.
Usage:
MEASure[:SCALar][:CURRent][:DC]:MIN?
Queries the minimum measured output current.
User Manual 1178.8736.02 ─ 05
INST OUT1
MEAS:ENER:STAT ON
MEAS:ENER:STAT?
MEAS:ENER:STAT? -> 1
Energy counter of Ch1 is enabled.
MEAS:POW? -> 3.00E+00
Query only
Query only
MEAS:CURR? -> 1.000E +00
Query only
Query only
Query only
Remote Control Commands
Measurement Commands
129