R&S NGL200 Series User Manual page 68

®
R&S NGL200/NGM200
4. Select "Edit existing file" to edit an existing arbitrary file.
The R&S NGL/NGM opens a dialog to select the source and file to edit existing file.
5. Select the required source and file for editing.
6. Select "Load" to load the file for editing.
Alternatively, select "New file" to edit a new arbitrary file.
The R&S NGL/NGM opens the arbitrary editor dialog to edit the arbitrary file.
Figure 6-23: Arbitrary editor dialog
7. Configure the "Arb Editor" with the required voltage, current and duration.
The R&S NGL/NGM displays the on-screen keypad for data entry.
8. Confirm values with the unit keys.
9. Select the interpolation checklist to toggle on/off the interpolation function on the
arbitrary data.
10. Select the "Plus" or "Minus" icon to add or delete the arbitrary data from the dialog.
●
●
User Manual 1178.8736.02 ─ 05
"+": A new row of arbitrary data is added to the end of the table. The new addi-
tion is a copy of the last arbitrary data in the table.
"-": To delete, select the row of arbitrary data for deletion follows by the "Minus"
icon.
Instrument Functions
Advanced Features
65