Status:questionable Registers; Status:operation:instrument:ntransition; Status:operation:instrument:isummary<Channel>:Ntransition; Status:operation:instrument:ptransition - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Return values:
<Event>
Usage:
STATus:OPERation:INSTrument:NTRansition <NegativePosition>
STATus:OPERation:INSTrument:ISUMmary<Channel>:NTRansition <arg0>
Sets or queries the negative transition filter. Setting a bit in the negative transition filter
shall cause a 1 to 0 transition in the corresponding bit of the associated condition regis-
ter to cause a 1 to be written in the associated bit of the corresponding event register.
Suffix:
<Channel>
Parameters:
<NegativeTransition> Range:
Example:
STATus:OPERation:INSTrument:PTRansition <PositiveTransition>
STATus:OPERation:INSTrument:ISUMmary<Channel>:PTRansition <arg0>
Sets or queries the positive transition filter. Setting a bit in the positive transition filter
shall cause a 0 to 1 transition in the corresponding bit of the associated condition regis-
ter to cause a 1 to be written in the associated bit of the corresponding event register.
Suffix:
<Channel>
Parameters:
<PositiveTransition> Range:
Example:

7.9.2 STATus:QUEStionable Registers

The commands of the STATus:QUEStionable subsystem control the status reporting
structures of the STATus:QUEStionable registers:
The suffix <n> at Channel selects the instrument. The range is <1...2>.
STATus:QUEStionable:INSTrument:CONDition?
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:CONDition?
STATus:QUEStionable:INSTrument:ENABle
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:ENABle
STATus:QUEStionable:INSTrument[:EVENt]?
STATus:QUEStionable:INSTrument:ISUMmary<Channel>[:EVENt]?
STATus:QUEStionable:INSTrument:NTRansition
User Manual 1178.8736.02 ─ 05
Range: 1 to 65535
Query only
.
1..n
1 to 65535
STATus:OPERation:INSTrument:ISUMmary1:
NTRansition?
Query for negative transition.
.
1..n
1 to 65535
STATus:OPERation:INSTrument:ISUMmary1:
PTRansition?
Query for positive transition.
............................................................... 154
..................................................................... 154
................................................................... 154
...............................................................155
Remote Control Commands
Status Reporting Commands
............................... 154
..................................... 154
................................... 154
153