R&S NGL200 Series User Manual page 55

®
R&S NGL200/NGM200
Figure 6-12: Battery simulator dialog
4. Activates the "Enabled" menu item.
The R&S NGM enables the battery simulation function.
5. Select the "Load frrom file..." to load the battery model file.
The R&S NGM opens a dialog to select the source and file location.
6. Selects the required source and file location.
Alternatively, select "New file" to edit a new battery model file. The R&S NGM
opens the battery model editor dialog to edit the battery model file.
See
7. Select the "Load from file..." to load the selected file.
The R&S NGM loads the selected battery model file.
Battery model editor
To edit the battery model file:
1. Press [Settings] key.
The R&S NGM displays the device/channel menu window.
2. Select "Device" tab to edit the battery model file.
The R&S NGM displays the "Device" menu.
3. Select "Battery Model Editor" menu item from the menu.
The R&S NGM displays the "Battery Model Editor" dialog.
User Manual 1178.8736.02 ─ 05
"Battery model editor" on page 52.
Instrument Functions
Battery Simulator
52