Advanced Features; Arbitrary - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
The R&S NGL/NGM starts or steps through the arbitrary signal when a trigger is
detected.

6.7 Advanced Features

The "Arbitrary" and "Ramp" are two functions which can be used to control the wave-
form of voltage and current output.

6.7.1 Arbitrary

The "Arbitrary" dialog allows you to generate freely programmable waveforms which
can be reproduced within the
1. Press [Settings] key.
The R&S NGL/NGM displays the device/channel menu window.
2. Select the required channel tab to configure arbitrary function.
The R&S NGL/NGM displays the selected channel menu.
3. Select "Arbitrary" from the menu.
The R&S NGL/NGM displays the "Arbitrary" dialog.
Figure 6-22: Select source and file location
4. Activates the "Enabled" menu item.
The R&S NGL/NGM enables the arbitrary function and displays the "Arbitrary" icon
on the selected channel status bar information.
5. Selects "Load from file.." to load the arbitrary file.
6. Selects the required source and file location.
Alternatively, select "New file" to edit a new arbitrary file. The R&S NGL/NGM
opens the arbitrary editor dialog to edit the arbitrary file.
See
User Manual 1178.8736.02 ─ 05
Safety Limits
Chapter 6.7.1.1, "Arbitrary
for voltage and current.
Editor", on page 64.
Instrument Functions
Advanced Features
63