R&S NGL200 Series User Manual page 116

®
R&S NGL200/NGM200
OUTPut:GENeral[:STATe] <state>
OUTPut:GENeral[:STATe]?
Sets or queries all previous selected channels simultaneously
Parameters:
<state>
Example:
OUTPut[:STATe] <state>
OUTPut[:STATe]?
Sets or queries the output state of the previous selected channels.
Parameters:
<state>
Example:
OUTPut:DELay:DURation <duration>
OUTPut:DELay:DURation?
Sets or queries the duration for output delay.
Parameters:
<duration>
Example:
User Manual 1178.8736.02 ─ 05
OFF | ON | 0 | 1
OFF | 0
Switches off previous selected channels simultaneously.
ON | 1
Switches on previous selected channels simultaneously.
See Example "Activating the channels"
OFF | ON | 0 | 1
OFF | 0
Switches off previous selected channels.
ON | 1
Switches on previous selected channels.
See Example "Activating the channels"
numeric | MIN | MAX
numeric
Numeric value of the duration in seconds.
MIN
Minimum value of the duration at 0.001 seconds.
MAX
Maximum value of the duration at 10.00 seconds.
Range: 0.001 to 10.00
*RST: 0.001
Default unit: s
OUTPut:DELay:DURation 1
OUTPut:DELay:DURation? -> 1
Returns output delay of 1 s.
Remote Control Commands
Configuration Commands
on page 112
on page 112
113