Status Reporting Commands; Status:operation Registers - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Parameters:
<Year>
Setting parameters:
<Month>
<Day>
<Hour>
<Minute>
<Second>
Example:
LOG:TRIGgered <state>
LOG:TRIGgered?
Sets or queries the state for manual trigger logging function.
Parameters:
<state>
Example:

7.9 Status Reporting Commands

The status reporting system stores all information on the present operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. The STATus:OPERation and
STATus:QUEStionable subsystems contains commands to control the status report-
ing structure of the instrument.
See

7.9.1 STATus:OPERation Registers

The commands of the STATus:OPERation subsystem control the status reporting
structures of the STATus:OPERation register.
The suffix at <Channel> selects the instrument channel. the range is <1...2>.
STATus:OPERation:INSTrument:CONDition?
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition?
User Manual 1178.8736.02 ─ 05
Sets the year for the data logging function.
Sets the month for the data logging function.
Sets the day for the data logging function.
Sets the hour for the data logging function.
Sets the minute for the data logging function.
Sets the second for the data logging function.
LOG:STIM 2018,08,18,08,18,18
LOG:STIM? -> 2018,08,18,08,18,18
OFF | ON | 0 | 1
OFF | 0
Manual trigger function is disabled.
ON | 1
Manual trigger function is enabled.
LOG:TRIG ON
LOG:TRIG? -> 1
Chapter A.3.1, "Structure of a SCPI Status
Remote Control Commands
Status Reporting Commands
Register", on page 162.
....................................................................152
....................................152
151