Network Connection - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Figure 6-33: Interfaces dialog
4. Select the connected interface (Network,
the necessary parameters required.
● Network
● USB
● GPIB

6.15.1 Network Connection

There are two methods to establish a local area network (LAN) connection with the
R&S NGL/NGM for remote control operation.
●
LAN
●
Wireless LAN
1. Select "Network" from the
The R&S NGL/NGM displays the "Network" dialog.
Figure 6-34: Network dialog
2. Set the required "SCPI Raw Port" and "Hostname".
User Manual 1178.8736.02 ─ 05
Connection................................................................................................77
Connection......................................................................................................81
Address......................................................................................................... 82
Figure
USB Class or GPIB
6-33.
Instrument Functions
Interfaces
Address) to configure
77