Hcopy:data; Hcopy:size:x; Hcopy:size:y; Log[:State] - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
Parameters:
<samplerate>
Example:

HCOPy:DATA?

Returns the actual display content (screenshot). The DATA? query responses the
screenshot data in binary format.
Usage:

HCOPy:SIZE:X?

Returns the horizontal dimension of the screenshots.
Usage:

HCOPy:SIZE:Y?

Returns the vertical dimension of the screenshots.
Usage:
LOG[:STATe] <state>

LOG[:STATe]?

Sets or queries the data logging state.
Parameters:
<state>
Example:
LOG:COUNt <count>
LOG:COUNt? [<count>]
Sets, queries the number of measurement values to be captured.
Setting parameters:
<count>
User Manual 1178.8736.02 ─ 05
500K | 250K | 125K | 62K5 | 31K25 | 15K625 | 7K812 | 3K906 |
1K953 | 976 | 488 | 244 | 122 | 61 | 30 | 15
FLOG1:SRAT 500K
Set Ch1 FastLog writes sample rate at 500K samples/sec.
Query only
Query only
Query only
OFF | ON | 0 | 1
ON | 1
Data logging function is enabled.
OFF | 0
Data logging function is disabled.
*RST: OFF | 0
LOG ON
LOG? -> 1
Data logging function is activated.
numeric_value | MIN | MAX
Remote Control Commands
Data and File Management Commands
148