Opp Setting - R&S NGL200 Series User Manual

®
R&S NGL200/NGM200
[SOURce:]VOLTage:PROTection:TRIPped? <state>
Queries the OVP state of the selected channel.
Example:
Usage:

7.5.11 OPP Setting

The POWer:PROTection subsystem contains the commands for setting the over-
power protection parameters for the output channels. The default unit is W.
User Manual 1178.8736.02 ─ 05
See Example "Configuring the overvoltage protection"
on page 123.
VOLT:PROT:TRIP?
Response 1, the OVP is tripped.
Response 0, the OVP is not tripped.
Query only
Remote Control Commands
Configuration Commands
125