R&S NGL200 Series User Manual page 94

®
R&S NGL200/NGM200
*STB?
Status byte query
Reads the contents of the status byte in decimal form.
Usage:
*TRG
Recall
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal. This common command complements the commands of the TRIGger
subsystem.
Usage:
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code.
Return values:
<ErrorCode>
Usage:
*WAI
Wait to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
*OPC).
Usage:
*SAV <Number>
Save
Stores the current instrument settings under the specified number in an internal mem-
ory. The settings can be recalled using the command
ber.
User Manual 1178.8736.02 ─ 05
Query only
Event
integer > 0 (in decimal format)
An error occurred.
0
No errors occurred.
Query only
Event
Remote Control Commands
Common Setting Commands
with the associated num-
*RCL
91