Access Control [69] - Honeywell Galaxy Flex V3 Series Installer Manual

Galaxy Flex Installer Manual

Access Control [69]

The Access Control system is a complete security system. You can choose the type of access
control to use: either the MAX
Access Control menu
69 = Access Control
û 1 = Access Mode
û 0 = Disabled
1 = Enabled
û 2 = MAX
û 1 = MAX Address A/B to select line
2 = MAX Parameters
Continued on next page
4
or the door control module or both.
ent to start MAX search
0 = Online, ent then key 0 - 7 to readdress MAX
1 = Standalone
MAX XXX (select)
û 1 = Descriptor
û 2 = Relay Duration
û 3 = Open Timeout
û 4 = Groups
û 1 = Alarm Group
û 2 = Group Restrict
3 = Exit group
û 5 = Emergencies Enable or disable option. If group mode is
û 6 = Security
û 1 = Nightlock
û 2 = Unlock Time
û 3 = Dual Mode
4 = Dual Time
7 = Menu Recall
û 1 = Menu Function (** = not used)
û 2 = Menu Mode
3 = Keypad
A/B to move to required MAX address
# to display MAX address graphic
ent to select:
# = toggle upper case, lower case or
library text
* = delete last character
A/B = move to character/word
ent = assign character/word
esc = save programming
1 - 60 seconds (default = 05)
0 - 60 seconds (default = 10)
enabled, a separate enable is available for
each group
0-10 weekly schedules
0-10 weekly schedules
û 0 = Disabled
û 1 = Card and Card
2 = Card and Pin
Option not available
1 = Card Held
** = Keypad
# = enable/disable
Access Control [69]
183