Honeywell Galaxy Flex V3 Series Installer Manual page 55

Galaxy Flex Installer Manual
representation of each address. By matching the
keyboard to the LEDs on the MAX, you can identify each device on the system.
Date [25.4]
Use this option to display the events on a specific date. Enter a date using the DD/MM/YY
format.
Access Log
Access events are transmitted using Contact ID, SIA and Alarm Monitoring formats.
Transmitted access events are listed in the table:
Event Description
Access Granted Valid card presented and validated
Invalid Card Card presented has not been
programmed onto system
Card Rejected Valid card presented, but rejected
for some reason
Access log information
The access log contains one of these reasons for the door not operating:
Not Grp Match
Reject Grp Set
Illegal Time
The access log also shows user information:
Press to view the reason for rejection:
#
Line Number
Note: MAX or prox readers' addresses are different to DCM addresses. For example,
0013, where:
00 = not required
1 = line number 1
3 = address number 3
Access Log print and store option
The Access Doors (MAX Log) is printed online and stored in the event memory.
(LED off) and
SIA
Code
DG
DD
DK
01:00 THU 26 APR
USER 001 Rejct
DCM address
Reader number
1021 Grp A1
Reject Grp Set
Access Doors [25]
(LED on) on the
CID Trigger
Code
421 MAX TAGS
422 MAX TAGS
422 MAX TAGS
Mod User
No ID
Yes Yes
Yes No
Yes Yes
55