Access Control; Access Control Card; Acess Control Card - Batch Learn; User And Access Templates - Honeywell Galaxy Dimension User Manual

ACCESS CONTROL

Access Control Card

An access control card is a prox tag that can be presented to a proximity reader to:
• Allow access to access controlled doors
• Cancel alarms, faults or tampers
• To set or unset the system.
To assign a user an access control card:
• Access the menu option 42.1=User Codes.
• Press the A > key to scroll to the correct user number and then press ent.
• Press A > until 07=Card No is displayed on the keypad's LCD, then press ent.
• Key in the access control card's serial number, the * (star key) can be used to erase the
last digit keyed in.
• Press ent to store the serial number.
• Press esc to return to the banner.

Acess Control Card - Batch Learn

The batch learn function allows one or more access control cards to be assigned to users. This
is achieved using a specific proximity reader which is assigned when the system is installed.
To enter and use the batch learn function:
1 Access the menu option 42.3.4=Batch Start.
2 Key in the first user number to be assigned an access control card.
3 Press ent.
4 Access the menu option 42.3.1=Add Batch.
5 At the proximity reader present the first access control card to be assigned.
6 That access control card will be assigned to the displayed user and then the keypad's
LCD will move on to the next user.
7 Repeat steps 5 thru 6 to assign multiple access control cards.
8 Press esc to finish and return to the banner.

USER AND ACCESS TEMPLATES

Every user on the system can be allocated an access template. An access template is a list of
groups and time schedules that will dictate which groups a user is able to gain access to and
also the times that the user can gain access. This method means that if there are multiple doors
leading into one group or area, then a user will be given access to all those doors in one move.
This reduces programming time and complexity.
4