Honeywell Galaxy Flex V3 Series Installer Manual page 141

Galaxy Flex Installer Manual
ARC Notify [56.1] (continued)
û 2 = Reports
û 1 = ARC
û 2 = Aux 1
û 3 = Aux 2
û 4 = Aux 3
5 = DTMF
û 3 = Comm Fail Time
4 = Line Fail Path
û 1 = Receiver (1-9, default = 1)
2 = All
û 1 = Account No
û 2 = Triggers
Select a Trigger Event (01 to 19)
û 3 = Rx Sequence
Direct entry of a string of receiver numbers 1-9
û 4 = Audio Receiver
5 = IP Check(ARC Report only)
û 0 = Disable
1 = Enable
Each one of these menu options has the same
û sub-menu options as 1 = ARC above.
û 1 = Account No
û 2 = Channels 1-8
û 1 = Channel 1
û 2 = Channel 2
û 3 = Channel 3
û 4 = Channel 4
û 5 = Channel 5
û 6 = Channel 6
û 7 = Channel 7
8 = Channel 8
3 = Rx Sequence (see 1 = ARC)
Communications [56]
û 1 = Status (0 = Disabled, 1 = Enabled)
2 = Groups (if enabled)
û 1 = Op Function
û 2 = Output Mode
û 3 = Op Polarity
4 = Restoral
Each one of these menu options
û has the same sub-menu options
as 1 = Channel 1 above.
141