Users And Access Templates - Honeywell Galaxy Flex V3 Series Installer Manual

Additional programming
Program outputs (53 ent + Output Address)
Output Function (
Descriptor (
5 ent
Output Mode (
2 ent
Latch (
1 ent
Reflex (
2 ent
Pulse (
3 ent
Output Groups (
Control via TouchCenter (
TouchCenter
Output Polarity (
to 0 V when activated)
Communication (56 ent)
Where applicable, for each module type (
Select format
Select trigger events or channels to enable
Set account number
Set phone number/IP addresses
Set up autotest frequency
Perform an engineer test
Timers (65 ent)
Weekly Schedule (
Autoset (groups) (
Timer Outputs (

Users and access templates

If full time-controlled access control is required, allocate an access template to every user.
An access template is a list of groups and time schedules that provides access to multiple
areas and at many set times with only one programming step. This reduces programming
time and complexity.
The Access Template to be used for each user is chosen within each user's options in the
Template menu (
42 ent 1 ent 9 ent
Access Templates are programmed in the Access Templates menu (
fully customisable. In each Access Template, each group must be allocated a time schedule.
30
) – assign an output type
1 ent
) – name an output (up to 12 characters)
) – access these options:
) – output active unlit a valid code entered
) – output follows activity of trigger event
) – output remains active for a programmed pulse time
) – assign groups to the output
7 ent
6 ent 1 ent
) – switch polarity (the default is positive, switches from +12 V
3 ent
) – assign schedules to required functions
1 ent
) – select a schedule for each group
3 ent
) – enable timers and assign weekly schedules.
2 ent
).
Galaxy Flex Installer Manual
) – set which outputs are controllable from the
to ):
1 8 ent
), and are
45 ent 6 ent