Bypass Commands; Open/Close Windows; Access Control Commands - Honeywell VISTA-128BPT User Manual

Using #77 Instant Activation Mode (cont'd)
B y p a s s C o m m a n d s
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for bypass commands. If
3 (During) is selected for auto-bypassing, the system bypasses the zone(s) specified on a particular
zone list at the beginning of the window and unbypasses them at the end of the window. If it is
selected for auto unbypassing, the system removes the bypass at the beginning of the window and
restores the bypass at the end of the window.
Action Code
30
31
O p e n / C l o s e W i n d o w s
Activation time 3 (During) is the only valid choice for these commands.
Action Code
40
41
42
A c c e s s C o n t r o l C o m m a n d s
Action Code
55
56
57
58
59
60
61
62
63
64
66
67
68
69
70
71
72
73
74
Auto bypass - Zone list
Auto unbypass - Zone list
Enable Opening Window by partition
Enable Closing Window by partition
Enable Access Window for access group
Access Point Grant
Access Point Grant with Override
Access Point Protect
Access Point Bypass
Access Point Lock
Access Point Exit
Access Point Group Grant
Access Point Group Grant with Override
Access Point Group Protect
Access Point Group Bypass
Access Point Group Exit
Access Point Partition Grant
Access Point Partition Grant with Override
Access Point Protect by Partition
Access Point Bypass by Partition
Access Point Lock by Partition
Access Point Exit by Partition
Access Point Trigger On
Access Point Trigger Off
52
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
Action Specifier
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Access Point #
Group #
Group #
Group #
Group #
Group #
Partition #
Partition #
Partition #
Partition #
Partition #
Partition #
Trigger #
Trigger #