System [23] - Honeywell Galaxy Flex V3 Series Installer Manual

Galaxy Flex Installer Manual

System [23]

Use this option to display an overview of the system configuration. You can scroll through
the items shown below, which are displayed using both lines on the keypad screen.
Group status U = Unset, S = Set, P = Part Set, and L = Locked-out for each of the
groups displayed.
Note: Enabling the Show Status option (refer to Keypad [58]) allows the group set
status to be displayed from the normal banner (when the system is set or unset)
by pressing
Version of software in panel.
RIOs fitted includes the on-board RIOs.
Codes used include the manager, engineer and remote codes.
The number of keypads on the system.
The number of Comms Modules on the system.
Printer 0–1 (Printer Interface Module).
The number of RF Portals on the system.
The number of MAX Modules on the system.
The number of wired Camera PIRs on the system.
The number of DCM Modules on the system.
The number of MUX modules on the system.
Panel location up to 16 characters of text entered in System Text parameter (option
51.15.2).
Default Set gives the default settings set up in option 51.17.
and simultaneously.
#
System [23]
53