Touchcenter Keypad/Keyprox - Honeywell Galaxy Flex V3 Series Installer Manual

Galaxy Flex Installer Manual

TouchCenter Keypad/KeyProx

The TouchCenter connects to the control panel RS485 data bus. It combines a clear
graphical display with simple touch-screen control, providing an easy user interface. It can
also include an optional proximity reader in the enclosure.
Installation procedure
1. Remove the mounting plate from the TouchCenter by pushing it towards the bottom of
the keypad.
2. Locate the mounting plate over the mounting surface such that the opening of the
mounting plate is aligned with the cable.
3. Pass the cable through the opening of the mounting plate.
4. Secure the mounting plate in place using the screws supplied. There are four screw
holes (A) in the mounting plate.
Keypad
interface button
Figure 11 Homepage screen
Appendix G: Peripherals
EMERGENCY
button
233