Honeywell Galaxy Flex V3 Series Installer Manual page 62

Codes [42, Quick Menu 7]
Scroll to the required option or type an option number, and then press ent. The options are
described below.
Standard user access
Modify PIN [42.1.User code.1]
PINs identify each user to the panel and permit users to operate the system.
Use this option to assign a PIN to a selected user, or modify an existing PIN. The PIN must
be a four, five or six digit number, and unique to the system.
Note: PIN size is dependent on the Min Pin Size [51.66] parameter.
To assign or modify a PIN:
1. Do one of the following:
Assign a PIN: Type a new PIN number of the correct length.
If you attempt to assign a PIN that already exists, the message DUPLICATE
ENTRY is displayed and the PIN is not assigned to the user.
Modify a PIN: Press
modified PIN.
2. When the correct PIN has been entered, press
If a MAX No. has been previously assigned the display will prompt: delete MAX No.
A=YES, B=NO and return to the previous menu level.
Authorized manager access
To delete a PIN:
1. Press .
2. Press ent. A hollow box ( ) is displayed on the top line of the screen.
To assign a dual code:
Press while the Modify PIN option is selected. The # symbol is displayed at the start
#
of the assigned user PIN, for example #1314.
When a PIN has been assigned as a dual code two solid boxes ( ■■ ) are displayed on the top
line of the user number details screen.
Note: You can't assign the Master manager code as dual.
Dual codes operation
If you enter a single dual code the message NO ACCESS – ADDITIONAL CODE is
displayed. A second dual code must be entered within 60 seconds of the first dual code to
access the menu, and set or unset the system.
Dual codes can be different types. The level of access granted is determined by the second
code entered.
62
to erase the existing PIN, and then type the new or
ent
Galaxy Flex Installer Manual
.