Honeywell Galaxy Flex V3 Series Installer Manual page 177

Galaxy Flex Installer Manual
Programming Timer Events
1. Select the Events option. The programmed status (if any) of the first timer is displayed.
If the timer has not been programmed the keypad displays the following information:
first timer
2. To enter a new timer program for W01:
a. Press to select the timer.
ent
b. Press or
A
c. Press to select the status ON or OFF.
#
d. Press the number keys (0-9) to select the first time (4 digit 24 hour format) on the
top row.
e. Press to accept the programming. Typically the following information is
ent
displayed:
3. To program the OFF time on the bottom row repeat step 2. Typically the following
information is displayed:
4. Press three times to escape from the Timers option.
esc
Note: The Timer Status can be switched On and Off by users via option Timer Control
[45].
Holiday Period [65.1.n.4]
This is the holiday period programmed in Modify Dates [45.2.1]. Up to 40 holiday periods
can be viewed with this option.
Holiday Schedule [65.1.n.5]
This is an alternative schedule that is used if the Holidays [45.2] option is activated. The
system defines a selection of holiday dates [65.1.4] and then a schedule of times can be used
on those dates under this option. Up to 4 holiday schedules can be selected.
Pattern Day [65.1.n.6]
Use this option to set the programmed timers that are effective when the Weekend Work
[45.5.1.1] option is selected by the user; the timers of the selected Pattern Day are adopted
by the days selected for weekend work.
On selecting this option the programmed Pattern Day is displayed; the default is 1=MON.
W01*** *** **:**
to select the day (MON to SUN).
B
W01MON ON
W01MON ON
MON OFF 17:00
08:30
08:30
Timers [65]
177