Honeywell Galaxy Flex V3 Series Installer Manual page 135

Galaxy Flex Installer Manual
Source Type
a) Not Used
b) Zone Address
c) User Code
d) Output Address
e) MAX Address
f) Weekly Schedule
g) RF Fob
Destination Type * Modifier
a) Not used
b) Zone Address
c) User Code
d) Output Type
e) Output Address
f) Keypad Address
* Modifier Example
Display
–
Off *1014
On *1014
Off *001
On **001
Off #1014
On *#1014
Off 01
On *01
Off WK01
On *WK01
–
Table 8 Link Source
Notes
– The link is not operational.
– When the link is active, the zone is omitted from the system
– When the link is active, the user's PIN and MAX card are not
operational.
– When the link is active, all outputs programmed with the selected
function are activated.
– When the link is active, the specific output address is switched on.
Please note that when using the output address as the destination, the
deactivation of the link will switch the output off immediately, overriding
any pulse time or latch mode of the output programming.
– When the link is active, the buttons on the keypad will not operate.
Table 9 Link Destination
Notes
This link is not operational
When the zone is opened the link is active.
When the zone is closed the link is inactive.
When the zone opens the first time, the link is activated.
When the zone opens a second time, the link is deactivated.
When the code is entered, the link is activated momentarily
only. This option is only practical to trigger a destination
event, for example, an output pulse.
When the code is entered the first time, the link is activated.
When the code is entered the second time the link is
deactivated.
When the output is on, the link is active.
When the output is off, the link is inactive.
When the output turns on the first time, the link is activated.
When the output turns on a second time, the link
deactivates.
When the MAX is swiped with a card the link activates
momentarily only. This option is only practical to trigger a
destination event, for example, an output pulse.
When the MAX is swiped with a card, the link is activated.
When the MAX is swiped a second time, the link
deactivates.
On time activates the link. Off time deactivates the link.
The first on time activates the link. The next on time
deactivates the link.
A single press of the RF Fob button combination (
activates the link, a second press deactivates the link. This
applies to any RF fob programmed on to the system
Links [54]
),
+
135