Honeywell Galaxy Flex V3 Series Installer Manual page 78

Remote Access [47]
If site programming changes send the new programming to the downloader.
On a predetermined schedule, activate an automatic periodic upload.
On a predetermined schedule, activate an automatic remote routine inspection.
Note: The Auto Service function works for both the Internal Telecoms and the Ethernet
module.
Use the following sub-options to select the mode of the automatic communication in each of
the three situations.
Auto Service Mode Off [47.4.1.0]
In this mode the panel will not automatically initiate a remote servicing call even if the panel
programming has changed. This is the default setting.
Auto Service Mode Timed [47.4.1.1]
In this mode, following modification to panel programming, a remote servicing call is
initiated automatically between a programmed start time (option 47.4.2.1) and end time
(option 47.4.2.2). To avoid traffic congestion the panel selects a random time between the
start and end times to initiate the call. Once the connection is made, the new panel
programming is uploaded to the remote servicing package.
Auto Service Mode Instant [47.4.1.2]
In this mode, following modification to panel programming, the connection to the remote
servicing package is initiated immediately, using call back number 1, after you exit
engineering mode. Once the connection is made, the new programming is uploaded to the
remote servicing package.
Auto Service Mode Confirm [47.4.1.3]
In this mode, when you exit from engineering mode following a change to the panel
programming, you are prompted to initiate a remote connection. This must be authorized by
an appropriate user type before the call is made.
Once authorized, a two minute delay period is initiated. During this period, you can initiate
or cancel the call.
When a connection is initiated the panel uploads the new panel programming to the remote
servicing package.
Auto Service Timers Start Time [47.4.2.1]
Set the start time of the off-peak window during which the panel can initiate an automated
remote servicing call. The default is 01:00.
Auto Service Timers End Time [47.4.2.2]
Set the end time of the automated remote servicing call during the off-peak window. The
default is 06:00.
78
Galaxy Flex Installer Manual