Programming For 4100Sm; Programming For Access Control - Honeywell ADEMCO VISTA-40 Installation And Setup Manual

Programming for 4100SM

•
1✳40 & 1✳41 Date and Time Set Report Codes
•
1✳70 Event Log Types (1=enable; 0=disable
•
1✳71 12/24-Hour Time Stamp (0=12 hr; 1=24 hr)

Programming for Access Control

A user can trigger an access point (i.e., door strike) for 2
seconds by entering User Code + [0].
To program the VISTA-40 for access control, perform
the following steps:
Step Action
1 Enter Relay Programming in the #93 Menu
Mode.
2 Program the relay type as 1, or 2.
3 For type 1, program the ECP address and
relay number.
4 For type 2, program the house and unit codes.
5 Program the relay number in field 1∗76
(partition-specific).
See Relay Programming in the Programming Guide for
a detailed explanation.
Section 4 – Programming
4-7