Keypad [58] - Honeywell Galaxy Flex V3 Series Installer Manual

Galaxy Flex Installer Manual

Keypad [58]

You can assign individual attributes to each keypad to control how each responds.
On selecting the Keypad option, details of the first keypad connected to the system are
displayed.
keypad address
flashing cursor if this
is the viewed keypad
To select a keypad address enter its address or by use
1=A-key is displayed. Press
Note: When the address of the keypad currently being used is displayed, a black square
flashes on and off over the first digit of the keypad address.
A-key [58.1]
Code Status
Use this option to assign a function to the
Status is displayed. The options are:
0=OFF [ ]
1=WITH CODE [+]
2=NO CODE [–]
Select the required Code Status, and then press
Note: The Code Status assigned to the key is displayed when selecting the keypad
address, for example A[12], which indicates that the
code.
Menu Option
To assign one of the options to the
currently assigned option is displayed.
To assign a new function, enter the full menu option number 11 to 72, or press the
keys until the required option is displayed; press
previous menu level.
B-key [58.2]
key programming is identical to that of the
B
option 1
10 A[12]+ B[13]-
Mimic=1
option 3
or to select the required option, and then press
A B
key. When you select the option, 1=Code
A
A key disabled.
A key requires code to be entered prior to operation.
A key is a single touch operation no code is required.
key, press
A
10 A-key Option
12=Timed Set
A
option 2
Light=1
option 4
and and then pressing
A B
.
ent
key does not require a user
A
to select 2=Menu, and then press
A
to accept the selection and return to the
ent
key.
Keypad [58]
.
ent
.
ent
. The
ent
or
A B
157