Siemens SINAMICS G120 Operating Instructions Manual page 93

Default setting 20: "3-wire (enable/on/reverse)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in BOP-2: 3-wIrE 2
Default setting 21: "USS fieldbus"
DO 0: p0730, DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Designation in BOP-2: FB USS
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
AO 0: p0771[0], AO 1:
p0771[1]
AO 0: p0771[0], AO 1: p0771[1]
4.6 Installing Control Unit
DI 0: r0722.0, ..., DI 4:
r0722.4
DI 2: r0722.2
Installing
AI 0: r0755[0]
93