Siemens SINAMICS G120 Operating Instructions Manual page 91

Default setting 15: "Process industry"
DO 0: p0730, DO 1:
p0731
Motorized potentiometer, setpoint after the ramp-function generator: r1050
Speed setpoint (main setpoint): p1070[0] = 755[0], p1070[1] = 1050
Designation in BOP-2: Proc
Default setting 17: "2-wire (forward/backward 1)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in BOP-2: 2-wIrE 1
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
AO 0: p0771[0], AO 1:
p0771[1]
AO 0: p0771[0], AO 1:
p0771[1]
4.6 Installing Control Unit
DI 0: r0722.0, ..., DI 5:
r0722.5
DI 0: r0722.0, ..., DI 2:
r0722.2
Installing
AI 0: r0755[0]
AI 0: r0755[0]
91