Siemens SINAMICS G120 Operating Instructions Manual page 157

Advanced settings
You can debounce the digital input signal using parameter p0724.
For more information, please see the parameter list and the function block diagrams 2220 f
of the List Manual.
Analog inputs as digital inputs
NOTICE
Destruction of the analog input as a result of the excessively high input current
The 10 V or 24 V voltage source will destroy the analog input if the operating mode selector
switch is set to "Current input" (I).
• Set the operating mode selector switch of the analog input to voltage (U).
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
To use an analog input as additional digital input,
you must interconnect the corresponding status
parameter r0722.11 or r0722.12 with a binector
input of your choice.
You may operate the analog input as digital input
with 10 V or with 24 V.
Advanced commissioning
6.2 Inverter control
157