Siemens SINAMICS G120 Operating Instructions Manual page 138

Low voltage converters, chassis and wall/panel mounted devices with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

5.4 Commissioning with a PC

Setting the USB interface in STARTER

Proceed as follows to set the USB interface in STARTER:

1. Set the "Access point" to "DEVICE (STARTER, Scout)" and the "PG/PC interface" to

2. Press the "Update" button.

You have set the USB interface.

STARTER now shows the inverters connected via USB.

Converter with CU230P-2 Control Units

Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB

Sinamics g120c Sinamics g120p