Control Units - Siemens SINAMICS G120 Operating Instructions Manual

3.2

Control Units

The Control Units differ with regard to the type of fieldbus.
Exclusive version for Siemens IC BT
1)
Memory cards
Table 3- 1
Scope of delivery
Memory card without firmware
Memory card with firmware V4.6
Memory card with firmware V4.7
Memory card with firmware V4.7 SP3
Shield connection kit for the Control Unit
The shield connection kit is an optional component. The shield connection kit comprises the
following components:
● Shield plate
● Elements for optimum shield support and strain relief of the signal and communication
cables
Table 3- 2
Shield connection kit 1 for the CU230P-2 Control Units with all fieldbus
interfaces except for PROFINET.
Shield connection kit 3 for the CU230P-2 and CU240E-2 Control Units
with PROFINET interface.
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
Designation Article number
CU230P-2 HVAC 6SL3243-0BB30-1HA3 USS, Modbus RTU, BACnet MS/TP, P1
CU230P-2 DP 6SL3243-0BB30-1PA3 PROFIBUS DP
CU230P-2 PN 6SL3243-0BB30-1FA0 PROFINET IO, EtherNet/IP
CU230P-2 CAN 6SL3243-0BB30-1CA3 CANopen
CU230P-2 BT 6SL3243-6BB30-1HA3 USS, Modbus RTU, BACnet MS/TP, P1
1)
Memory cards to back up inverter settings
Article Nos.
Fieldbus
Article number
6SL3054-4AG00-2AA0
6SL3054-7EG00-2BA0
6SL3054-7EH00-2BA0
6SL3054-7TB00-2BA0
Description
3.2 Control Units
6SL3264-1EA00-0FA0
6SL3264-1EA00-0HB0
27