Table of Contents
Advertisement
Correct the ink drop position for bidirectional printing
When the condition for printing (media thickness/head height/etc.) has been changed, perform the following
operation to correct the ink drop position for bidirectional (Bi) printing and obtain the proper printing result.
Example of a Drop Position correct Printed Pattern
Output
direction
• When the toggle print function is enabled, select the area to perform test printing. For the selecting
procedure, refer to "Print functions with printing area selection" in P.3-20 "Starting toggle printing".
Set a media on the machine and set a printing origin. (
1
Press the
2
Press
3
Press the
4
Press the
5
Press
6
• Setting value: Y600dpi / Y900dpi / Y1200dpi
• Perform correction for all resolutions.
Press the
7
Press the
8
• Test pattern is printed. (The printed patterns are called Pattern 1,
Pattern 2, Pattern 3... in the order of printing.)
3-24
key in LOCAL.
to select the setup.
key.
key.
to select the resolution.
key.
key to start pattern printing.
The dots at the fourth position counted from the zero
position in the positive direction form a straight line.
In this case, the dot position correction value is 4.0.
P.2-5)
F UNC T I ON
V I EW
F UNC T I ON
S E TUP
S E TUP
DROP . POS c o r r e c t [ EN T ]
S E TUP
DROP . POS c o r r e c t
DROP . POS c o r r e c t [ EN T ]
: Y 6 0 0 d p i
DROP . POS c o r r e c t
: Y 6 0 0 d p i
DROP . POS c o r r e c t
PR I N T
* * PR I N T I NG * *
[ EN T ]
[ EN T ]
[ EN T ]
P L E A SE WA I T
Advertisement
Table of Contents
