Function Setting Menu - MIMAKI JV330 Series Operation Manual

Chapter 6 Settings

6.3 Function Setting Menu

This is used to set various operations to ensure optimal machine performance.
l Menu List
Item
Logical Seek
Take-up Unit
Take-up Unit
Take-up SW
Drying Time
Scan
Print End
Power Setting
Auto Power-off
Auto Power-on
Setup
Time
*1
Setting
Host/OFF/ON Sets the range of carriage movement.
• OFF: Machine size area
• ON: Print data area
- Sets the take-up unit operation.
ON/OFF Set to "OFF" if the take-up unit is not used.
Continuous/ Sets the function performed by the ON/OFF button on the take-
Temporary up unit.
• Continuous: Press the button to start/stop the take-up unit.
• Temporary: The take-up unit operates only while the button
is pressed. The unit stops when the button is released.
- Sets the time for ink to dry.
Host/0.0 to 9.9 Sets the stop time of the carriage after each scan.
sec
• The MIMAKI RIP software (RasterLink) indicates this as
"Pause Time per Scan".
Host/0 to 120 Sets the stop time after printing. The next data is printed once
min the set time has elapsed.
• The Mimaki RIP software (RasterLink) does not allow the
user to specify Print End. If the machine is set to "HOST",
the time will be "0".
- Sets the times to turn the power on and off automatically.
5 to 15 to 60 Sets the time until the power is automatically turned off.
min
- Sets the time to automatically turn on the power.
ON/OFF Sets whether to turn on or off the power.
0:00 to 23:59 Sets the time to turn on the power.
168
Details
Unidirectional print
Carriage movement
Unidirectional print
Print data
Carriage movement
"Take-up Unit"(P. 60)
Bi-directional print
Bi-directional print