Automatic Maintenance Function; Setting The Refreshing Intervals; Setting The Cleaning Intervals And Type - MIMAKI UJF-3042 MkII Series Operation Manual

Chapter 4 Maintenance
Automatic Mainte-
nance Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the Auto Maint. functions, the following items can be
set:
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
Function name
Refresh Sets the refresh intervals.
Cleaning Sets the head cleaning intervals.
• If an ink tank error occurs, the operation set by the
Automatic Maintenance function is not performed.
Replace the waste ink tank. (
• During the execution of automatic maintenance,
ink flows into the waste ink tank. Check the
amount of ink in the waste ink tank every day, and
discard the ink if necessary. (
4-18
Descriptions
P.4-22)
P.4-23)

Setting the Refreshing Intervals

The refresh interval is set. Refresh is the operation to
discharge some ink from the nozzle to prevent nozzle
clogging.
Press the
1
Press to select "MAINTENANCE",
2
and press the
• MAINTENANCE MENU will be displayed.
Press to select "Auto Maint.",
3
and press the
Press the
4
• "Refresh" will be selected.
Press to set the refresh intervals,
5
and press the
• Set value : OFF / 1 to 24h
Press the
6
end the setting.

Setting the Cleaning Intervals and Type

The cleaning type and the interval between each cleaning
operation are set.
Press the
1
Press to select "MAINTENANCE",
2
and press the
• MAINTENANCE MENU will be displayed.
Press to select "Auto Maint.",
3
and press the
Press to select "Cleaning", and
4
press the
Press to select the cleaning
5
intervals, and press the
• Set value : OFF / 1 to 168h
Press to select the cleaning type,
6
and press the
• Set value : Soft/ Normal/ Hard
Press the
7
end the setting.
(MENU) in LOCAL mode.
key.
key.
key.
key.
key several times to
(MENU) in LOCAL mode.
key.
key.
key.
key.
key.
key several times to