KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 92

Step 45: Attach Safety Rail Assembly
A: Loosen all bolts installed in Step 39. (Fig. 39.1, 39.2 and 39.3)
B: Attach (394) Safety Rail to (392) Tunnel Post, (371) Access Upright and (352 and 351) Tunnel Ladder Rails
with 5 (H11) Hex Bolts (with lock washer, flat washer and t-nut) to both sides of Adventure Tunnel. Keep bolts
loose. (Fig. 45.1 and 45.2)
C: Make sure square and then tighten all bolts loosened in Part A.
Fig. 45.1
392
371
352
371
351
Warning!
Make sure the tunnel is installed on level ground.
Hardware
10 x 1/4 x 2-3/4" Hex Bolt
H11
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
92
392
394
1/4" Flat
Washer
1/4" Lock
Washer
H11
5 per side
371
1/4" T-Nut
352
Fig. 45.2