KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 78

Step 34: Monkey Rail Assembly
Part 2
E: Making sure that it's flush with the end and sides of (343) Tunnel MK Rail Left, place 1 (344) Floor Board End
B as shown in (fig. 34.7). and attach using 2 (S20) #8 x 1-3/8" Wood Screws.
F: Place (345) Floor Board End A next to (344) Floor Board End B, making sure that the notched out area is flush
with the end of (342) Tunnel MK Rail Right. Attach Board to (343) Tunnel MK Rail Left using 2 (S20) #8 x 1-3/8"
Wood Screws. (fig. 34.7)
G: Measure 5" from ladder end of (343) Tunnel MK Rail Left and (342) Tunnel MK Rail Right and attach 1 (346)
Floor Board using 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 34.6)
H: Evenly space remaining 15 (346) Floor Boards then attach all floor boards with 4 (S20) #8 x 1-3/8" Wood
Screws per board. (fig. 34.5)
Fig. 34.5
Notice T-Nut
at top
Fig. 34.6
5"
Wood Parts
16 x Floor Board 1 x 5 x 16-7/8"
346
16 x Floor Board End B 1 x 6 x 12-5/16"
344
16 x Floor Board End A 1 x 5 x 16-7/8"
345
346 X16
x 4 per
S20
board
346
S20
69 x
Fig. 34.7
345
342
Hardware
#8 x 1-3/8" Wood Screw
78
notched out
area is flush
S20
S20
343
344