Step 60: Attach Transom Assembly
Part 1
A: Place 1 Transom Assembly on both (031) Front Wall Panel and (033) Back Wall Panel so they are tight
to (571) Swing Top and (581) Wall Supports. From the outside attach each Transom Assembly to (581) Wall
Supports with 2 (S3) #8 x 2-1/2" Wood Screws per assembly. (fig. 60.1)
B: From the inside attach (581) Wall Supports to each Transom Assembly and both (031) Front Wall Panel and
(033) Back Wall Panel with 4 (S3) #8 x 2-1/2" Wood Screws per support. (fig. 60.2)
C: From the inside attach each (565) Wall Tie to both (031) Front Wall Panel and (033) Back Wall Panel with 2
(S11) #8 x 2" Wood Screws per board. (fig. 60.2)
Fig. 60.1
Transom
Assembly
031
581
033
Transom
Assembly
x 2 per Transom
S3
Assembly
581
033
Hardware
12 x
#8 x 2-1/2" Wood Screw
S3
4 x
#8 x 2" Wood Screw
S11
111
Fig. 60.2
581
(both
S3
supports)
S11
031
565
Transom
Assembly