KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 79

Step 35: Monkey Ladder Assembly
Part 1
Pre-drill all pilot holes using a 1/8" (3.2 mm) drill bit before installing Wood Screws.
A: Insert 4 (341) Dowels into (351) Tunnel Ladder Rail Right and (352) Tunnel Ladder Rail Left. Make sure
shoulder of dowel is against each rail before pre-drilling pilot holes. Drill 1/8" pilot holes through the rails and into
the dowels to prevent splitting. (Fig. 35.1)
B: Attach (341) Dowels to both rails with 2 (S3) Wood Screws per dowel. (Fig. 35.2)
Fig. 35.1
352
351
Fig. 35.2
352
Wood Parts
1 x Tunnel Ladder Rail Left 1-3/8 x 3-3/8 x 91-11/16"
352
1 x Tunnel Ladder Rail Right 1-3/8 x 3-3/8 x 91-11/16"
351
4 x Tennon Dowel 1-1/8 x 18-5/8"
341
S3
351
8 x
341
341
341
Hardware
S3
#8 x 2-1/2" Wood Screw
79
S3
Fig. 35.3
Rail