KidKraft Cedar Summit Adventure Ridge Playset Installation And Operating Instructions Manual page 27

Step 5: Floor Assembly
Part 2
C: Measure the distance from the Back Wall to the Front Wall from the inside of the panels to make sure it
equals 35-3/4". Maintain this measurement when installing the floor boards. Starting at the Slide Wall place 3
(051) Floor Boards tight to the previously attached (051) Floor Board, followed by 1 (053) Narrow Floor Board
then 8 more (051) Floor Boards. Make sure all boards are equally spaced then attach to (052) Long Floor Joist
and each (043) Side Joist with 6 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 5.4 & 5.5 & 5.6)
Fig. 5.4
Swing Wall
Back Wall
Wood Parts
11 x Floor Board 1 x 5 x 35-5/8"
051
1 x Floor Board 1 x 4 x 35-5/8"
053
Back Wall
Front Wall
x 8
051
053
051
Slide Wall
061
72 x
Fig. 5.5
043
043
x 6 per
S20
board
Hardware
#8 x 1-3/8" Wood Screw
S20
27
Back Wall
Front Wall
Tight
Fig. 5.6
072
070
070